BeskrivningPolarisation (Circular).svg	The direction of the helix relative to the central axis represents the direction of the electric field of the circularly polarized light at each point in space. The blue and red lines are projections of the helix onto two planes at right angles. There is an version which is identical to this original with the exception of phase indictors to make the phase relationship of its components clearer. Refer to Other Versions section below.
Datum	12/02/07
Källa	Own drawing down in Mathematica, edited in the open source program Inscape.  Den här W3C-overifiera vektorbilden skapades med Inkscape .
Skapare	inductiveload
Tillstånd (Återanvändning av denna fil)	Public domainPublic domainfalsefalse Jag, upphovsrättsinnehavaren till detta verk, släpper detta verk i public domain. Detta gäller globalt. I vissa länder kan detta inte vara juridiskt möjligt; i så fall: Jag ger härmed envar rätten att använda detta verk för alla ändamål, utan några villkor, förutom villkor som lagen ställer.
Andra versioner	Filer som bygger på denna fil:  Polarisation (Circular) With Phase Indicators.svg Linear polarisation Elliptical polarisation

This figure requires the use of Arrow3D, which is not included in the StandardPackages (as of Feb 2007). This can be obtained from Wolfram Research at this location. The required packages are:

<< Graphics`
<< Arrow3D`Arrow3D`

The code is:

wavefunction = ParametricPlot3D[{Sin[4t], -Cos[4t], t}, {t, 0, 5}, 
BoxRatios -> {1, 1, 4}, ImageSize -> 400, Boxed -> False, Axes -> 
    False, PlotPoints -> 600, ViewPoint -> {2, 2, 2}, PlotRange -> All]

repsi = ParametricPlot3D[{Sin[4t], -1, t, RGBColor[1, 0, 0]}, {t, 0, 5}, 
    BoxRatios -> {4, 1, 1}, ImageSize -> 500,
     Boxed -> False, Axes -> False, PlotPoints -> 600, PlotRange -> All]

impsi = ParametricPlot3D[{-1, -Cos[4t], t, RGBColor[0, 0, 102/255]}, {t, 0, \
5}, BoxRatios -> {4, 1, 1}, ImageSize -> 500, Boxed -> False, Axes -> False, 
      PlotPoints -> 600, PlotRange -> All]

end = ParametricPlot3D[{Sin[t], -Cos[t], 0}, {t, 0, 
    2π}, BoxRatios -> {4, 1, 1}, ImageSize -> 500, Boxed -> False, 
    Axes -> False, PlotPoints -> 600, PlotRange -> All]

xaxis = Graphics3D[Arrow3D[{0, 0, -1}, {0, 
  0, 6}, HeadSize -> UniformSize[.5], HeadColor -> Black]]

uaxis = Graphics3D[Arrow3D[{0, -1, 0}, {0, 3, 0}, HeadSize -> 
    UniformSize[.5], HeadColor -> Black]]

vaxis = Graphics3D[Arrow3D[{-1, 0, 0}, {3, 0, 0}, HeadSize -> 
    UniformSize[.5], HeadColor -> Black]]

plane = Graphics3D[Polygon[{{1.2, 1.2, 0}, {1.2, -1.2,
   0}, {-1.2, -1.2, 0}, {-1.2, 1.2, 0}}]]

crate = WireFrame[Graphics3D[Cuboid[{1, 1, 0}, {-1, -1, 5}]]]

Show[wavefunction, xaxis, uaxis, vaxis, plane, repsi, impsi, end, crate]